Using The Tether; Connecting The Power; Connecting To A Monitor; Connecting Usb Devices - Advantech PWS-872 User Manual

Using the Tether

1. Insert one of the tether's loop end through the hole of the capacitive pen.
2. Insert the other end through the first loop and pull it tight.
3. Insert the other loop end to either D-ring of PWS-872. Insert the capacitive pen
through the loop and pull it tight

Connecting the Power

Before you can use your PWS-872, you must fully charge the battery. Connect the
power adapter as shown and leave to charge for:
• A minimum of 2 hours when using the internal battery
• A minimum of 5 hours when a second battery is installed

Connecting to a Monitor

You can connect the PWS-872 to an external monitor for enhanced viewing.
Connect one end of an HDMI cable to the HDMI port on the left side of the PWS-
872.
Connect the other end to the HDMI port on the monitor.

Connecting USB Devices