General Specifications for Datalogger Units
Storage: Maximum of 8 months of data at 5 second intervals (based on
a normal workweek).
Memory Type: Wrap-around memory ensures most recent data is
Sample Rate: One reading every 5 seconds (standard)
Data Recorded: All sensor readings, all alarm conditions, calibrations,
event flags, battery status, sensor status, confidence beep activation,
and detector status along with the time and date and the detector serial
Indicators: Icon advising datalogger is operating normally
Transfer Accessory: IR DataLink or other BW accessory
BW Excel Datalog Manager (EDM): This software organizes GasAlert
Extreme datalog and event log files into a readable report
Fleet Manager CD Support: This software organizes GasAlert Extreme
datalog and event log files into a readable report
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules and ICES-
003 Canadian EMI requirements. These limits are designed to provide
reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that radio interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for