Setting The Stel Alarm Setpoint; Setting The Low Alarm Setpoint - Honeywell GasAlert Extreme User Manual

GasAlert Extreme
User Manual

Setting the STEL Alarm Setpoint

To bypass and retain the current STEL alarm setpoint value,
C
press . The detector automatically proceeds to the low
alarm setpoint.
When the TWA alarm setpoint value has been changed or bypassed, the
Set STEL alarm setpoint screen displays.
D E
14. Press or to scroll to the required value.
C
15. Press to save the new value and proceed to the low alarm
setpoint.
If a new value is selected but not confirmed within 10 seconds
C
by pressing , the detector automatically retains the original
value and NO displays. The detector proceeds to the low alarm
setpoint.
38
Note
Note

Setting the Low Alarm Setpoint

To bypass and retain the current low alarm setpoint value,
C
press . The detector automatically proceeds to the high
alarm setpoint.
When the STEL alarm setpoint value has been changed or bypassed,
the Set LOW alarm setpoint screen displays.
\
D E
16. Press or to scroll to the required value.
C
17. Press to save the new value and proceed to the high alarm
setpoint.
If a new value is selected but not confirmed within 10 seconds
C
by pressing , the detector automatically retains the original
value and NO displays. The detector proceeds to the high
alarm setpoint.
Note
Note