Download  Print this page

Automatic Oxygen (O 2 ) Calibration Option - Honeywell GasAlert Extreme User Manual

Hide thumbs

Advertisement

GasAlert Extreme
User Manual
To enable/disable the latching alarm option, complete the following:
1. From the EXIT screen, press
option.
C
2. Press
to select the option. The LCD flashes either ON or
OFF.
D
E
3. Press
or
to toggle between the ON/OFF options. Ensure
the desired option is displayed and press
selection.
The LCD returns to the EXIT screen.
D
E
4. Press
or
to scroll to a new user option or press
and return to normal operation.
If the option is not confirmed by pressing
the detector returns to normal operation.
Automatic Oxygen (O
) Calibration Option
2
For oxygen detectors only.
If the automatic oxygen (O
ensure the detector is activated in safe area in normal (20.9%)
oxygen atmosphere.
20
D
E
or
to scroll to the LTCH
C
to confirm the
Note
C
within 10 seconds,
Note
) calibration option is enabled,
2
This option enables/disables the automatic oxygen (O
O
calibration begins automatically during start-up after the calibration
2
due screen displays.
The detector is shipped with the automatic O
disabled.
To enable/disable the automatic O
lowing:
1. From the EXIT screen of the user options menu, press
to scroll to the ACAL option.
C
to exit
C
2. Press
OFF.
D
3. Press
the desired option is displayed and press
selection.
The LCD returns to the EXIT screen.
D
4. Press
and return to normal operation.
If the option is not confirmed by pressing
the detector returns to normal operation.
Note
calibration option, complete the fol-
2
to select this option. The LCD flashes either ON or
E
or
to toggle between the ON/OFF options. Ensure
E
or
to scroll to a new user option or press
Note
C
) calibration. The
2
calibration option
2
D
E
or
C
to confirm the
C
to exit
within 10 seconds,

Advertisement

loading

  Related Manuals for Honeywell GasAlert Extreme