LAST and ALL Transfers
If the LAST or ALL option is selected, the LCD displays a countdown
and the data transmission icon to indicate that the detector is transferring
The number at the beginning of the countdown depends upon
the amount of data to transfer.
If the EVNT option is selected, the event logs transfer immediately and
the LCD displays the EXIT screen.
If the connection between the detector and the IR DataLink is discon-
nected during a transfer, FAIL displays.
The LCD then displays the EXIT screen.
1. From the PC, save the previously transferred data to ensure that
it will not be deleted.
2. Repeat steps #3-5 of the
3. From the detector, select LAST to automatically resume the
transfer from where it stopped sending.
Select ALL to transfer all of the data again.