Download  Print this page

Passcode Protection Option; Enable Passcode Protection - Honeywell GasAlert Extreme User Manual

Hide thumbs

Advertisement

GasAlert Extreme
User Manual
If a value is not bypassed by pressing
the detector automatically proceeds to the next date/time
option. If the Time Minute value was not bypassed, the detec-
tor automatically proceeds to the Exit screen.
If a new value is selected but not confirmed by pressing
within 10 seconds, NO displays and the detector proceeds to
the next date/time option. If a new Time Minute value was
selected but not confirmed, the detector automatically pro-
ceeds to the Exit screen.

Passcode Protection Option

The passcode protection option (PASS) prevents unauthorized access
to the user options and the calibration/set alarm setpoint functions.
The passcode protection option can be enabled or disabled.
The detector is shipped with the passcode protection option
disabled.

Enable Passcode Protection

To enable passcode protection, complete the following:
The passcode is provided on a separate card inside the ship-
ping container.
16
Note
C
within 10 seconds,
C
Note
Note
1. From the EXIT screen of the user options menu, press
to scroll to the PASS option.
C
2. Press
to select the option.
3. Set and PASS continually flash. Press
required passcode, and press
4. The ON screen displays and flashes continually. Press
confirm. The LCD then returns to the EXIT screen.
D
E
5. Press
or
to select another user option, or press
the user options and return to normal operation.
If an incorrect passcode is selected or a correct passcode is
not confirmed within 10 seconds, NO displays and the LCD
returns to the EXIT screen.
D
D
E
or
to scroll to the
C
to confirm the selection.
C
Note
E
or
C
to
to exit

Advertisement

loading

  Related Manuals for Honeywell GasAlert Extreme