Using Your Device In A Vehicle; Using The Car Holder; Connecting The Car Charger - Becker BE7977 User Manual

1.4 Using Your Device in a Vehicle

A car holder and a car charger are supplied with your device.

Using the Car Holder

CAUTION:
Select an appropriate location for the car holder. Never place the holder where the driver's
field of vision is blocked.
If the car's windshield is tinted with a reflective coating, an external antenna (optional) may
be needed to route the antenna to the top of the car through a window. When closing the
car window, be careful not to pinch the antenna cable
The car holder consists of a bracket and a stand. Use the car holder
to fix your device in a vehicle. Make sure that the GPS antenna has
a clear view of the sky. (See the document supplied with the car
holder for the installation instruction.)
For initial positioning, remain at the same spot with a clear view of
the sky. The GPS may take a few minutes to find its current
location initially.
NOTE: Depending upon the specific model purchased, the car holder supplied with your
device may not look exactly the same as the picture shown.

Connecting the Car Charger

The car charger supplies power to your device when you are using
the device in a car.
CAUTION: To protect your device against sudden surges in current,
connect the car charger only after the car engine has been started.
1. Connect one end of the car charger to the power connector of
your device.
2. Connect the other end to the cigarette lighter in the car to
power and charge your device. The indicator on the car charger
lights in green to indicate that power is being supplied to your
device.
6