Removing The Shelf Supports - Electrolux EKC6461AOK User Manual

20 www.electrolux.com
• Clean the oven interior after each use.
Thus you can remove dirt more easily
and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.
• If you have nonstick accessories, do
not clean them using an aggressive
agents, sharp edged objects or dish-
washer. It can destroy nonstick coating!
Stainless steel or aluminium
appliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean
the oven control panel with the
same precautions
11.1 Catalytic walls (selected
models only)
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects
on walls while the oven operates.

Removing the shelf supports

2
1
To support this self-cleaning process
heat the oven without any food
regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Set the Conventional Cooking function.
• Set the oven temperature to 250 °C
and let oven operate for 1 hour.
• Clean the oven cavity with a soft and
damp sponge.
WARNING!
Do not attempt to clean catalytic
surface with oven sprays, abrasive
cleaners, soap or other cleaning
agents. This will damage the cata-
lytic surface.
Discolouration of the catalytic sur-
face has no effect on catalytic
properties.
11.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.