Removing The Shelf Supports - Electrolux EKI6762AOX User Manual

Stainless steel or aluminium
appliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean
the oven control panel with the
same precautions
11.1 Catalytic walls (selected
models only)
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects
on walls while the oven operates.
To support this self-cleaning process
heat the oven without any food
regularly:
• Turn the oven light on.
• Remove accessories from the oven.

Removing the shelf supports

1
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point to
the front!
2
• Set the Conventional Cooking function.
• Set the oven temperature to 250 °C
and let oven operate for 1 hour.
• Clean the oven cavity with a soft and
damp sponge.
WARNING!
Do not attempt to clean catalytic
surface with oven sprays, abrasive
cleaners, soap or other cleaning
agents. This will damage the cata-
lytic surface.
Discolouration of the catalytic sur-
face has no effect on catalytic
properties.
11.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
1. Pull the front of the shelf support
away from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
CAUTION!
Make sure that the longer fixing
wire is in the front. The ends of
the two wires must point to the
rear. Incorrect installation can
cause damage to the enamel.
ENGLISH 31