Pnp/Pci Configurations - Abit AN8 32X User Manual

BIOS Setup

3-7. PnP/PCI Configurations

Resources Controlled By
x IRQ Resources
PCI/VGA Pallete Snoop
PIRQ_0 Use IRQ No.
PIRQ_1 Use IRQ No.
PIRQ_2 Use IRQ No.
PIRQ_3 Use IRQ No.
** PCI Express relative items **
Maximum Payload Size
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Resources Controlled By:
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto(ESCD)]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the "IRQ Resources" menu.
IRQ Resources:
Click <Enter> key to enter its submenu:
This item sets each system interrupt to either [PCI Device] or [Reserved].
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Back to PnP/PCI Configurations Setup Menu:
PCI/VGA Palette Snoop:
This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not.
[Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA.
[Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA.
Phoenix – Award BIOS CMOS Setup Utility
PnP/PCI Configurations
F6: Fail-Safe Defaults
Phoenix – Award BIOS CMOS Setup Utility
PnP/PCI Configurations
F6: Fail-Safe Defaults
Auto(ESCD)
Press Enter
Disbaled
Auto
Auto
Auto
Auto
4096
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
Item Help
F7: Optimized Defaults
F7: Optimized Defaults
3-23
User's Manual