Abit AN8 32X User Manual page 36

3-10
IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, IDE Channel
3 Master, IDE Channel 4 Master, IDE Channel 5 Master, IDE Channel 6
Master:
Click <Enter> key to enter its submenu:
IDE HDD Auto-Detection
IDE Channel 1 Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
IDE HDD Auto-Detection:
This item allows you to detect the parameters of IDE drives by pressing <Enter> key. The parameters will
be shown on the screen automatically.
IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, IDE Channel 3 Master, IDE Channel 4
Master, IDE Channel 5 Master, IDE Channel 6 Master:
When set to [Auto], the BIOS will automatically check what kind of IDE drive you are using. If you want
to define your own drive by yourself, set it to [Manual] and make sure you fully understand the meaning
of the parameters. Please refer to the instruction manual provided by the device's manufacturer to get the
setting right.
Access Mode:
This item selects the mode to access your IDE devices. Leave this item to its default [Auto] setting to
detect the access mode of your HDD automatically.
Capacity:
This item displays the approximate capacity of the disk drive. Usually the size is slightly greater than the
size of a formatted disk given by a disk-checking program.
Cylinder:
This item configures the number of cylinders.
AN8 32X
Phoenix – Award BIOS CMOS Setup Utility
IDE Channel 1 Master
F6: Fail-Safe Defaults
[Press Enter]
[Auto]
[Auto]
0 MB
0
0
0
0
0
Item Help
F7: Optimized Defaults
Chapter 3