2-16
(13). Front Panel Audio Connection Header
This header provides the connection to audio connector at front panel.
•
To use the audio connector at front panel, remove all the jumpers on this header, and then connect
to front panel by the extenson cable provided with the chassis.
•
To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at
pin 5-6, and pin 9-10 (default setting).
(14). Internal Audio Connectors
These connectors connect to the audio output of internal CD-ROM drive or add-on card.
AN8 32X
Pin
Pin Assignment
1
Audio Mic.
3
Audio Mic. Bias
Speaker Out Right
5
Channel
7
X
Speaker Out Left
9
Channel
Chapter 2
Pin
Pin Assignment
2
Ground
4
VCC
Speaker Out Right
6
Channel Return
8
NC
Speaker Out Left
10
Channel Return