Pnp/Pci Configurations - Abit IX48 GT3 User Manual

[Keyboard 98]: Use the power-on button on the "Keyboard 98" compatible keyboard to power
on the system.
- KB Power ON Password
This item sets the password required in order to power on your computer.
Do not forget your password, or you will have to clear the CMOS and reset all
※
parameters in order to utilize this function again.
- Hot Key Power ON
This item powers on the system by pressing <Ctrl> key plus one of each function key (<F1> ~
<F12>) simultaneously.
Restore On AC Power Loss
This item selects the system action after an AC power failure.
[Power Off]: When power returns after an AC power failure, the system's power remains off.
You must press the Power button to power-on the system.
[Power On]: When power returns after an AC power failure, the system's power will be
powered on automatically.
[Last State]: When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurred. If the system's power is off when AC
power failure occurs, it will remain off when power returns. If the system's power is on when
AC power failure occurs, the system will power-on when power returns.

2.7 PnP/PCI Configurations

Resources Controlled By
X - IRQ Resources
PCI/VGA Palette Snoop
PCI Latency Timer(CLK)
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Resources Controlled By
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the "IRQ Resources" menu.
IX48 GT3
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Auto
Press Enter
Disabled
32
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
2-21