AEG Electrolux D1100-4 User Manual page 43

Warning: Do not attempt to lift
this appliance by the handle(s).
Each person should squat either side of the
appliance.
Tilt the appliance so that your hands can
support the underside of the appliance.
Keeping your back straight, raise the
appliance to the
straightening at the knees.
Rest the rear underside of the appliance on
the cabinet floor while your hands support
the front.
The appliance can be pushed fully into the
cabinet. Take care to avoid fouling the
mains lead.
Ensure the appliance is central and level.
Do not remove spacers fitted behind fixing
holes.
When the appliance is fully housed screw
the stability screws (supplied with the
appliance) into the side of the cabinet taking
care not to distort the side trims (See Fig 9).
It is advisable to turn each screw
alternatively to avoid damaging the trims.
Switch on the appliance then refer to the
operating instructions.
correct height by
Fixing points for
stability screws
Fig. 9
43