Removing And Replacing The Wirework Runners; Cleaning The Shelves, Wirework Runners And Grill/Oven Furniture; Cleaning Inside The Oven(S) - AEG Electrolux D1100-4 User Manual

Removing and replacing the
wirework runners
Remove all shelves and furniture from the
oven.
Hold the wirework at the bottom, unclip from
the cavity side and gently pull towards the
centre of the oven.
Unhook the runner at the top and remove
from the cavity.
To replace the runners, hook the wirework
side runner into the cavity, slide back and
press into place.
Ensure the wirework runners
are firmly in position before
replacing the oven shelves.
Cleaning the shelves, wirework
runners and grill/oven furniture
All removable parts, except the grill pan
handle can be washed in the dishwasher.
The grill pan, grill pan grid, oven shelves and
wirework runners may be cleaned using a
soap impregnated steel wool pad. Soaking
first in hot soapy water will make cleaning
easier.

Cleaning inside the oven(s)

The vitreous enamel coating in the ovens
can be cleaned using normal oven cleaners
or aerosol oven cleaners with care. Ensure
that the manufacturers instructions are
followed and that all parts are well rinsed
afterwards.
Aerosol cleaners must not come
into contact with elements, the door
seal, or any painted finishes as this
may cause damage.
28
Side panel
Cavity
centre