Network; Lan; Wan; Communications - THOMSON TCW770 User Manual

MAC and IP Addresses Summary

This table summarizes all the MAC and IP addresses that may be associated with the TCP/IP
communication stacks in your Wireless Cable Gateway. The ones actually used depend upon your
gateway Operating Mode, as explained above. At minimum, your cable company will need to know the
MAC address associated with IP Stack 1, which is the MAC address shown on the modem label.
Stack Name Purpose - Mode
IP Stack 1 CM WAN access - all Modes
IP Stack 2 local management - CM Mode
IP Stack 3 only
IP Stack 4
IP Stack 5 CableHome remote management
--- - CH Mode only
end-user remote management,
LAN WAN access - RG Mode
only
WAN data access -
CH Mode only
local management -
RG, CH Modes only
LAN gateway
MAC and IP Addresses
Illustrations contained in this document are for representation only.
Chapter 3: Networking
MAC Address
per label on CM assigned by cable company
during initialization
CM label + 1 fixed at 192.168.100.1
CM label + 2 assigned by cable company
CM label + 3 assigned by cable company
CM label + 4 fixed at 192.168.0.1
CM label + 5
61
IP Address