11/ Radio - THOMSON TCW770 User Manual

Chapter 2: WEB Configuration

1. 802.11/ Radio

To set the basic configuration for the wireless features, please click Radio item from the Wireless menu.

Interface: The wireless radio in your gateway can be completely de-activated by changing Interface to
Disabled. Click the Apply button to save your settings. If you want to re-activate the disabled wireless radio
in your gateway, need to contact cable operator.

Wireless MAC Address: The MAC address for this wireless device will be displayed in this field
automatically.

Output Power: This setting decides the output power of this device. You may use it to economize
on electricity by selecting lower percentage of power output. Control the range of the AP by
adjusting the radio output power.

802.11 Band: It can Support 2.4G and 5G.

802.11n mode: It will help you to Enable or Disable the 11N mode. To enable you need to select Auto, to
disable you need to select Off

Bandwidth: Select wireless channel width 20Mhz is for default value (bandwidth taken by wireless signals of
this access point.)
 Sideband for Control Channel (40Mhz only): There are ―Lower‖ and ―Upper‖ can be selected if Bandwidth
40Mhz is Enabled.

Control Channel: There are 13 channels that you can choose. Choose the one that is suitable for this device.

Current Channel: The channel that you choose will be displayed in this field.

Restore Wireless defaults: To recover to the default settings, press this button to retrieve the settings and
click Apply.
Illustrations contained in this document are for representation only.
Fig. 30
40