Wireless Gateway TCW770 Overview
Front Panel
The following illustration shows the front panel of the TCW770 gateway:
Reset Button behavior
a) Push and hold the button between 0 and 5 seconds Reboot the device
b) Between 6 and 10 seconds Display the channel bonding status for DS and US
Note: This is the same as the above Channel Bonding display after the registration
c) After 11 seconds Perform the factory reset.
WPS LED is a backlight in WPS button
d) When WiFi is on, the LED is blinking
e) When WPS association is on, the LED is turned on
Illustrations contained in this document are for representation only.
Chapter 1: Connections and Setup
5