Voltage Transformers; Phase Identification; Backlight; Display Contrast - Fluke 1735 User Manual

Power logger

Hide thumbs Also See for 1735:

Table of Contents

Voltage Transformers

If you use voltage transformers, select transformation ratio with ENTER. Press

the 4 5 key and enter any transformation ratio with 21.

For transformation ratio details see information on the voltage transformer.

Here you can choose whether the display shows "A, B, C" for phase

identification or "L1, L2, and L3." In this manual, phases are called A, B, and

C, but this is equivalent to L1, L2, and L3.

This selects whether the backlight deactivates automatically after 30 seconds

or whether you want to always deactivate it manually after you turn it on with

the C key.

If the battery is in use, use the backlight only if necessary in order to

conserve battery life.

Select the display contrast optimal for you with 21.

Version & Calibration

This menu serves for your information. No adjustments can be made. The

displayed data give information of type and version of the logger firmware.

Note

Power Logger

Basic Operation

Table of Contents