Split Phase - Fluke 1735 User Manual

1735
Users Manual

Split Phase

For Split Phase, the Neutral is center-tapped and there are two hot legs which
correspond to A and B test Leads. AB is the voltage from phase to phase,
which is twice that of each individual hot leg. Refer to Figure 7 and connect
the leads as follows:
Voltage:
Network
Line 1
Line 2
Line 1
N
Current:
Network
A (L1)
B (L2) Line 1
Not connected Neutral
N
28
Test Leads
A (L1)
B (L2)
C (L3)
N
Test Leads
A (L1)
B (L2)
C(L3)
N