Changing parameters:
The displayed parameters can be modified with the cursor control
keys (in the available preset values).
If values are not preset you can modify them by using the cursor
control keys. With 4 5 you can select the decimal place and with
2 1 you can modify the number.
Selected parameters are stored in the memory with Enter. With ESC
the adjusted value can be rejected at any time.
Parameter Configuration
Logging Menu
If you call the logging menu, then you can select between two further
submenus: Menu for adjusting the averaging time and for adjusting the event
threshold in recording adjustments.
In the menu Averaging you select the time over which the data are to be
averaged. You can also select these values from the predefined values for
averaging time. As you change the averaging time, you will see on the display
the resulting logging time available for each averaging interval.
Note
Power Logger
Basic Operation
edx009.bmp
15