Scope
Select Scope with the rotary switch.
In this measuring mode you get a live picture of the waveforms of
Voltage (V)
Current (I)
Angle ( )
for all three phases (L1, L2, L3).
Measurement
If you select the measuring mode with the rotary switch the following figure
appears on the display. The three phase voltages and current values are plotted
for the time of one period.
21 Switch between the individual phases or total view of all phases.
4 5 While viewing the individual phases, the cursor can be shifted and the
value at this location is displayed.
In the individual view, the
With Hold/Run the momentary values "freeze" and the measurement is
stopped or started again.
angle is also shown.
Power Logger
Measuring Functions
edx033.bmp
45