Safety Instructions - Fluke 1735 User Manual

Safety Instructions

Please read this section carefully. It will make you familiar with the most
important safety instructions for handling your Logger. In this manual, a
Warning identifies conditions and actions that pose hazard(s) to the user. A
Caution identifies conditions and actions that may damage the Calibrator or
the test instruments.
To prevent possible electrical shock or personal injury,
follow these guidelines:
The Logger must only be used and handled by
qualified personnel.
Adhere to local and national safety codes.
Individual protective equipment must be used to
prevent shock injury where hazardous live
conductors are exposed.
To avoid electrical shock, remove all test leads
from the Logger before you open the battery door.
Open the Logger only to replace the rechargeable
battery.
Maintenance work must be done only by qualified
service personnel.
Use only specified current probes. If you use
flexible current probes, wear suitable protective
gloves or work on de-energized conductors.
Protect the Logger against dampness, wetness and
humidity.
To prevent electrical shock, always connect
voltage and current test leads to the Logger before
connecting to the load.
XW Warnings
Power Logger
Safety Instructions
3