What To Do If - Electrolux EON67000 User Manual

What to do if ...

Problem
The cooking zones are not
functioning
The oven does not heat up The oven has not been switched
The oven lighting is not op-
erating
The oven is not heating up.
Time is lit.
F11 appears in the clock
display
An error code not listed
above appears in the time
display
Possible cause
Consult the operating instructions for the built-in cooking surface
on
The clock has not been set
The required settings have not
been set
Oven safety cut-out has been
triggered
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faulty
Demo mode is on.
The meat probe has short
circuited or the plug of the meat
probe is not firmly in position in
the socket
Fault in the electronics
what to do if ... electrolux 67
Remedy
Switch the oven on
Set the current time on the clock
Check the settings
See Oven Safety Cut-out
Check fuse. If the fuses trip sev-
eral times, please call a qualified
electrician
Replace oven bulb
Keep Selection
pressed for 2 seconds, then
within 2 seconds press and hold
Selection and
2 seconds
Insert the plug of the meat probe
as far as it will go into the socket
on the side wall of the oven
Switch off the appliance via the
house fuse or the safety switch
in the fuse box and switch it on
again.
If displayed again, please con-
tact the Customer Care Depart-
ment
button
buttons for