Table of Contents
Advertisement
When the Machine Does Not Operate Properly
Message
Machine Status
Please wait.
Cannot detect original size.
Check original orientation.
Check paper size.
You cannot enter the desired
copy set number.
The machine instructs you to
set the duplex tray.
The machine instructs you to
set the key counter.
Display
Problem
The display panel is off.
Nothing happens when the
operation switch is turned on.
Service and Supplies
When the Machine Does Not Operate Properly
Problem/Cause
The machine is warming up.
Improper original is set.
Original is not set.
There is no copy paper that is in
the same direction as the
original.
Improper paper size is set.
The number of copies exceeds
the maximum copy quantity.
----------------------
----------------------
Problem/Cause
The machine is in Energy Saver
mode.
The operation switch is turned
off.
The main power switch is
turned off.
The Main Power switch is
turned off.
The power cord is unplugged.
Action
Wait for the machine to warm
up.
Set non-standard size original
on the exposure glass.
Input the horizontal and vertical
size of the custom original.
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/
Enlarge mode.
Set your originals.
Set the original in the same
direction as the copy paper.
Select proper paper size.
You can change the maximum
copy quantity that you can
make at a time.
Reset the duplex tray correctly.
Set the key counter.
Action
Turn on the operation switch.
Turn the Main Power switch on.
Plug the power cord in securely.
6 9
Advertisement
Table of Contents
