Ptz Control Settings Page - Grandstream Networks GXV3601 User Manual

PTZ Control Settings Page

This page configures the PTZ settings.
1 . Select the PTZ protocol that the connected device supporting from the pull-down list
(Pelco-D/C)
2. Next, select the correct Baud Rate from the drop down menu to match the connected
device.
3. If multiple devices used, please select right address ID based on the 3
manual (the PIN switch address) here.
Figure 14: PTZ Setting Page
Grandstream Networks, Inc. GXV3601_HD User Manual
Firmware Version 1.0.4.43
rd
party device user
Page 39 of 59
Last Updated: 08/2013