Grandstream Networks GXV3601 User Manual page 16

Connect to the Camera using Static IP
If no DHCP server in the network, or the camera does not get IP from DHCP server, user can
connect the camera to a computer directly, using static IP to configure the camera.
The default IP, if no DHCP server; or DHCP offer time out (3 minutes), is 192.168.1.168
1. Connect the computer RJ-45 via an Ethernet cable directly to the IP camera GXV3601_HD.
2. Configure the computer using Static IP: 192.168.1.XXX (1<XXX<255, but NOT 168) and
configure the "Subnet mask" to "255.255.255.0". Leave the "Default Gateway" to "Blank" like
below:
3. Power on the GXV3601_HD.
4. Start the browser when the network connection is up.
5. Enter 192.168.1.168 in the address bar of the browser.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page
and start to show the video captured by the camera (by default the camera enabled anonymous
access)
Grandstream Networks, Inc. GXV3601_HD User Manual
Firmware Version 1.0.4.43
Page 16 of 59
Last Updated: 08/2013