What To Do If - Electrolux E8871-5 User Manual

What to do if ...

Problem
The cooking zones are not
functioning
The oven is not heating up
The oven lighting is not op-
erating
Pyrolytic cleaning is not
working ("C1" appears in
the clock display).
Pyrolytic cleaning is not
working ("C3" appears in
the clock display).
F11 appears in the clock
display
F2 appears in the clock dis-
play
A fault code that is not list-
ed above appears in the
clock display
Possible cause
Refer to the operating instructions for the built-in cooking surface
The oven has not been switched
on
The clock has not been set
The required settings have not
been made
The oven's automatic switch-off
has been triggered
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faulty
Side rails/oven shelf runners
have not been removed
Door not closed properly or door
lock faulty.
The meat probe has short
circuited or the meat probe's
plug is not firmly in position in
the socket
Door not closed properly or door
lock faulty
Electronic fault
What to do if ...
Remedy
Switch oven on
Set the current time on the clock
Check the settings
See Automatic switch-off
Check fuse If the fuses trip sev-
eral times, please call a qualified
electrician
Replace oven light bulb
Remove side rails/oven shelf
runners
Close door properly
Insert the meat probe plug into
the socket on the side wall of the
oven as far as it will go
Close door properly;
Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box.
If it is displayed again, please
contact the Customer Care De-
partment
Switch the appliance off and on
again via the building's fuse or
the safety switch in the fuse box.
If it is displayed again, please
contact the Customer Care De-
partment
69