Qlogic 12000 User Manual page 24

Operations and Administration
Configuration and Monitoring Features
Preset Tab
The Preset tab allows the user to quickly change log level settings for all software
modules on the switch.
Figure 1-28 Log System Configurator: Preset Tab
To change the log level settings:
1. Click the On-Off checkbox to the right of the setting(s).
2. Click the Apply button to save any changes.
Syslog Host Tab
Figure 1-29 Log System Configurator: Syslog Host Tab
The Syslog tab allows the user to configure logging messages to be sent to a syslog
host. If the Host IP address is 0.0.0.0, no syslog host is configured, otherwise log
messages are sent to the syslog server at a specified IP address and port.
To setup the syslog host:
1. In the Host IP text box, enter the IP address of the syslog host where the log
files are to be saved.
2. Click the Apply button to save the IP address.
1-18
S
D000101-000