Qlogic 12000 User Manual page 38

Operations and Administration
Configuration and Monitoring Features
3. Click Administer. The Configuration File Administration screen is displayed:
Figure 1-51 Configuration File Administration Screen
4. Click on the module to be modified. The row changes to orange.
5. In the Mode column, click the drop-down and select the configuration file
administration mode for a module.
Figure 1-52 Configuration File Administration - Mode Drop-down
Following is a description of each mode option:
6. To save, click on Apply.
NOTE:
1-32
Disabled
Following an Auto Restore of a configuration file to a module, the system
sets the module mode to Disabled. This allows the user to verify that the
configuration file is correct, before returning the module to Auto Backup
mode. In the Disabled mode, use the Backup and Restore buttons to
either back up or restore a configuration file.
Auto Backup
All configuration changes to a module are automatically backed up.
Auto Restore
The most recent configuration file is restored to a module inserted into a
specific Chassis slot. This is useful as a prerequisite to hot swapping a
module.
The Clear button deletes the configuration file from the switch.
S
D000101-000