Qlogic 12000 User Manual page 43

A
1. From the Chassis menu, click Chassis Traps.
2. Click Trap Control. The Chassis Trap Control screen is displayed:
3. Select or deselect the desired trap(s).
NOTE:
4. To save settings, click on Apply.
Following are definitions for each chassis trap:
Chassis Group
icsChassisTrapSystemSelfTestFailure
This trap indicates that the chassis failed one or more of its self-test(s).
icsChassisTrapSystemReboot
This trap indicates that the chassis is in the process of rebooting.
icsChassisTrapSystemMgmtSrvcStarted
This trap indicates that the internal service used to support the management of
the chassis is operational.
icsChassisTrapSystemMgmtSrvcAborted
This trap indicates that the internal service used to support the management of
the chassis has terminated abnormally.
D000101-000
Figure 1-61 Chassis Trap Control Screen
To generate an immediate trap, click the applicable Gen Trap button.
Operations and Administration
Configuration and Monitoring Features
1-37