Figure 2-12, Copying Device Drivers - LeCroy PXA125 User Manual

User Manual PXA125
The PXA125 is supplied with an installation At this time, CD. Insert
this CD into your CD-ROM drive. If you already have the instrument
drivers installed somewhere on your computer, you can specify your
custom location. Either type in the complete path or click on the
Browse button to identify your driver location.
After you insert the installation CD Windows
2000/XP will
program and the CD interface will show on your
monitor, similar to what you see in Figure 2-16. The
CD menu is not required for the driver installation
so you can either leave the menu on screen and
ignore it for now or click on Exit to remove the
application from your desktop. The installation CD
must be left in the CD-Rom drive for the
continuation of the installation process.
Press Browse... and specify the subfolder W2kdrv located in the
Drivers folder on your installation CD, as shown in Figure 2-12. Press
OK to acknowledge the selected path.
Figure 2-12 – Copying Device Drivers
NOTE
automatically load the autorun
Installation 2-29