View Commands - LeCroy PXA125 User Manual

User Manual PXA125
use for your waveform must divide by 4. If you placed your anchor in
between 4-point increments then the waveform length will
automatically adjust to the nearest legal size.
Trim Right
The Trim Right command operates exactly as the Trim Left command
except this command affects the portion to the right of the right
anchor.
Unmark
The unmark command removes the anchors from the waveform
screen and resets anchor positions to point 0 and the last waveform
point.
Undo
The Undo command undoes the last editing operation.
View Commands The View commands have commands that let you view various
options on the waveform area. The View commands include: View All,
Channel 1 Waveform, Return to Panel and Hide/Show Toolbar.
Description of the view commands is given in the following.
Zoom In
You may zoom in on portions of the waveform by dragging the left
and right anchors to the area you want to zoom, then use the Zoom In
command. The example in Figure 3-16 shows a magnified portion of
the waveform while the smaller window shows the complete
waveform map and the portion you magnified. You can click and drag
the white section to pan the magnified portion. While zoomed in you
can perform autoline and sketch editing, or zoom-in further by
dragging the left and right anchors then using the Zoon In command
again.
Zoom Out
The Zoom out command restores the waveform to its original size and
removes the waveform map window from the screen.
View Toolbars
The View Toolbars command lets you hide or show the various
toolbars that are available for the Wave Composer. The available
toolbars are: Link bar, File bar, Wave Edit bar and System bar.
3-78 ArbConnection