Edit Commands - LeCroy PXA125 User Manual

User Manual PXA125
previously saved waveform files and load these waveforms to the
waveform area. This command is also very useful for converting
waveform files to format that is acceptable by the Wave Composer.
The Open Waveform command can convert ASCII. *CSV (comma
delimited text), *PRN (space delimited text) and *.0* (LeCroy binary
format). For additional information on files format, contact your
nearest LeCroy representative.
Save Waveform (Binary)
The Save Waveform command will store your active waveform in your
PXA125 directory, as a binary file with an *.wav extension. If this is
the first time you save your waveform, the Save Waveform As...
command will be invoked automatically, letting you select name,
location and format for your waveform file.
Save Waveform As...
Use the Save Waveform As... command the first time you save your
waveform. It will let you select name, location and format for your
waveform file. The Save Wave As... dialog box is shown in Figure 3-
15.
Figure 3-45. The Save Wave AS... Dialog Box
Edit Commands The Edit commands are used for manipulating the waveform that is
drawn on the screen. The editing commands are explained in the
following paragraphs.
3-76 ArbConnection