LeCroy PXA125 User Manual page 63

User Manual PXA125
option.
Last Used Instrument – will direct ArbConnection communications to
the instrument you used the last time before you had to exit the
program.
If you chose to hide this dialog box, you can still access and change
the options from the System command, at the top of the screen.
Make your selection and click OK. The Startup & Communication
Updater dialog box will be removed from the screen. And two panels:
the Main and the Standard Waveform panels will now be accessible.
But before we go into panel operation, lets look at the toolbars at the
left top of the screen as shown in Figure 3-2.
Figure 3-32. ArbConnection's Toolbars
The standard Windows Menu Bar is the top bar. It provides access to
main system controls like saving files, and viewing or removal of
screen images. Some of the File commands such as New, Open,
Save and Save As... are also available as icons.
The second bar is called Active Instrument bar. It provides direct
access to different instruments that are plugged into the PXI chassis.
ArbConnection can operate many PXA125's units simultaneously. If
an instrument was connected to the PXI bus while invoking
ArbConnection, it will automatically be detected by the program and
its link location and identification displayed in the Link field.
1. Active instrument means that changes you
make on panels and waveform composers
will affect this instrument only.
2. ArbConnection can address any instrument,
which is plugged into your PXI system.
3. ArbConnection can address any combination
HINTS
ArbConnection 3-49