Square:dcycle<Duty_Cycle; Pulse:delay<Delay; Pulse:width<Pulse_Width - LeCroy PXA125 User Manual

User Manual PXA125
Parameter range
<phase> 0 to 360 in units of degrees
TRIangle:PHASe?
Response and default
The PXA125 will return the present start phase value. Default value is 0.
SQUare:DCYCle<duty_cycle>
Purpose
This command programs duty cycle of the standard square waveform. This command has no affect on
arbitrary waveforms.
<duty_cycle> sets the duty cycle value
Parameter type
Numeric
Parameter range
<duty_cycle> 0 to 99 in units of percent
SQUare:DCYCle?
Response and default
The PXA125 will return the present duty cycle value. Default value is 50.
PULSe:DELay<delay>
Purpose
This command programs delay of the standard pulse waveform. This command has no affect on arbitrary
waveforms.
<delay> sets the delay parameter
Parameter type
Numeric
Parameter range
<delay> 0 to 99.9 in units of percent
PULSe:DELay?
Response and default
The PXA125 will return the present delay value. Default value is 10.
PULSe:WIDTh<pulse_width>
Purpose
This command programs pulse high portion of the standard pulse waveform. This command has no affect on
arbitrary waveforms.
<pulse_width> sets the high time parameter
Parameter type
Numeric
Programming Reference 4-51