LeCroy PXA125 User Manual page 65

User Manual PXA125
The State button in the Output group has toggles the output on and
off. The first mouse click will push the button inwards and will turn on
a red bar at the center of the button, indicating that the function is on.
The second mouse click will turn the function off.
Radio Buttons – Are used for changing operating modes, or
selecting between mode options. One of the radio buttons is always
on with a red dot in its center, indicating its state condition. Pressing
some radio buttons will pop up a new panel. For example, if you press
the Triggered button in the operating Mode group, triggered operation
will be enabled and the Trigger Panel will automatically pop up and
cascade in front of the Main Panel.
LED's – The LED's indicate which of the parameters are displayed on
the Digital Display. Red LED indicates that the parameter name next
to this LED is selected. Only one LED can be ON at a time.
LED's may be turned on by pressing the button
below. You can also select an LED by clicking on
the LED itself!
Dial – Use the dial to modify displayed reading. To use the dial, press
and hold the mouse cursor on the dial and move the mouse in a
clockwise circle to increase the number, or counterclockwise circle to
decrease the displayed number. The dial modifies digits at the cursor
position and will allow modification within the legal range of the
displayed parameter. If you reach the end of the range, the dial will
have no further effect on the display. If you do not want to use the
dial, you can still change the display reading by using the [ ], or [ ]
keys, or simply type the required number using the your standard
keyboard features.
After you change the displayed readout, the
PXA125 will be updated with the new parameter
only after you press the Execute button.
Digital Display – The display is used for displaying and reading
various PXA125 parameters, just as you would use it on your
instrument.
HINT
NOTE
ArbConnection 3-51