Adjust The Oven Thermostat - GE Monogram ZET1038 Owner's Manual

30″ convection wall oven
Hide thumbs Also See for Monogram ZET1038:
Table of Contents

Advertisement

Do it
You may feel that your new oven cooks
differently than the one it replaced. We
yourself!
recommend that you use your new oven for
a few weeks to become more familiar with
it, following the times given in your recipes
as a guide.
If you think your new oven is too hot or too
cool, you can adjust the thermostat yourself.
If you think it is too hot, adjust the thermostat
to make it cooler. If you think it is too cool,
adjust the thermostat to make it hotter.
To adjust
the oven
thermostat
26
Pull the Temperature Control Knob off the
shaft, look at the back of the knob and note
the current setting before making any
adjustments.
Loosen both screws on the back of the knob.
To increase the oven temperature, move the
index mark one notch toward the words
"MAKE HOTTER."
To decrease the oven temperature, move the
index mark one notch toward the words
"MAKE COLDER."
Each notch changes the temperature by
10 degrees Fahrenheit.
Tighten the screws.
Replace the knob, matching the flat area
of the knob to the shaft.

Adjust the Oven Thermostat

Wall Oven
We do not recommend the use of thermometers,
such as those found in grocery stores, to check
the temperature setting of your new oven.
These thermometers may vary 20–40 degrees.
0
-10
+10
0
-20
Back of the Temperature Control Knob
Front of the Temperature Control Knob
(knob appearance may vary)
Index mark
0
0
+20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monogram zet1058

Table of Contents