Tensioner Pulley And Idler Pulley; Camshaft Sprocket Bolt Installation; Timing Belt Tensioner/Tensioner Spring Installation - Mitsubishi 4G1 series Workshop Manual

11A-4-4
Canvas worn exposing
rubber
Missing tooth
MD998715
E
Mitsubishi Motors Corporation
4G1 ENGINE (E - W) -
(7) Abnormal wear on teeth
(8) Missing teeth

2. TENSIONER PULLEY AND IDLER PULLEY

(1) Check that the pulleys turn smoothly without play and
INSTALLATION SERVICE POINTS
"AA CAMSHAFT SPROCKET BOLT INSTALLATION
MB990767
(1) Using the special tools shown in the illustration, lock the
(2) Tighten the camshaft sprocket bolt to the specified torque.
"BA TIMING BELT TENSIONER / TENSIONER SPRING
(1) Lock the timing belt tensioner in the illustrated position.
Timing belt
tensioner
(2) Fit one of the tensioner spring projections over the hooked
Nov. 1995
Timing Belt
Initial stage:
Canvas worn (fluffy canvas fibers, rubbery texture gone,
white discoloration, canvas texture indistinct)
Final stage:
Canvas worn, exposing rubber (tooth width reduced)
are not abnormally noisy. Replace either or both of the
pulleys if necessary.
camshaft sprocket in position.
INSTALLATION
portion of the timing belt tensioner and fit the tensioner
onto the oil pump case.
PWEE9520