11A-4-8
Small holes
E
Mitsubishi Motors Corporation
4G6 ENGINE (E - W) -
(4) Insert a wire (1.4 mm in diameter) into the set holes.
(5) Unclamp the auto tensioner from the vise.
6AE0050
(6) Install the auto tensioner to front case and tighten to
6EN0350
"JA TENSIONER PULLEY INSTALLATION
(1) Install the tensioner pulley in such direction that its two
6EN1323
"KA TIMING BELT INSTALLATION
(1) Check that the timing belt tensioner and spring have been
(2) Align timing mark on camshaft sprocket with timing mark
(3) Align timing mark on crankshaft sprocket with timing mark
Aug. 1998
Timing Belt
the specified torque.
Caution
D
Leave the wire installed in the auto tensioner.
small holes are arranged vertically.
installed in position. (See "JA)
on cylinder head.
on front case.
PWEE9616-A
Revised