Descriptions Of Displays Of The Handset And The Base - Siemens W10 User Manual

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Note: The dial mode of this phone has been set to tone
dialing. If you want to change it to pulse dialing, please refer to
the descriptions in the "Tone/Pulse Switch" section. If you are
not sure which mode to apply, please consult your phone
service company.
10.Place your base away from the "interference sources" (e.g.:
TV, PC, microwave oven, refrigerator, etc.) and in a central
position of its range, and if you can place it at a higher position,
it will work better. To obtain the best performance, pull the
antenna to its maximum length.
11.Adjust the flash time to a required period of time.
Note: Use the power adapter in the package. Using other
power adapters might cause damages to your phone.
Note: The dial mode of this phone has been set to be tone
dialing.
Descriptions of displays of the handset and
base
Line
Number of callers
Channel switch (handset)
VIP records
Batt. fully charged (handset)
Batteries flat (handset)
New incoming call records
Outgoing call records
Directory
Repeat call records
The ringer is programmed off
(Hour: minute
(Date-month) (handset)
Date (base)
Pin lock (base)
Base in use, handset is in standby (handset)
5