Static Color; Custom Color Mixing - Chauvet COLORband User Manual

Static Color

Custom Color
Mixing
Page 20 of 25
To select a static color, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER> and one of the following shows on the display:
·
r (red)
·
g (green)
·
b (blue)
·
gb (cyan)
·
r b (magenta)
·
rg (yellow)
·
rgb (white)
3. Use <UP> or <DOWN> to select the desired preset color.
4. Press <ENTER>.
To custom mix a color, do the following:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following shows on the display:
·
r 0–r255 (red, 0–100%)
·
g 0–g255 (green, 0–100%)
·
b 0–b255 (blue, 0–100%)
The option for setting the angle of the tilt position also appears:
·
t 0–t255 (0–270°)
3. Press <ENTER> repeatedly to select the desired color or the tilt option.
4. Use <UP> or <DOWN> to select the desired value (0–255).
NOTE: With the color options, selecting 0 will turn the color off.
5. Press <ENTER> to set the value and continue to the next custom mixing option.
6. Repeat steps 3 to 5 until you have your desired color and tilt position.
COLORband™ PiX-M User Manual (Rev. 1)