Configuration
(DMX)
Starting Address
COLORband™ PiX-M User Manual (Rev. 1)
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Turn the product on.
3.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The COLORband™ PiX-M uses up to 42 DMX channels in its 42-channel DMX
personality, which defines the highest configurable address to 471.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until the desired DMX personality (5-CH, 6-CH, 8-CH,
10CH, 11CH, 14CH, 20CH, 38CH, or 42CH) shows on the display.
2.
Press <ENTER>.and d 1–d512 shows on the display.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Page 11 of 25