Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
COLORband™ PiX-M User Manual (Rev. 1)
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The COLORband™ PiX-M may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13-mm holes, which are appropriate
for this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The rubber feet also serve as floor supports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Mounting Clamps
Hanging/Mounting
Bracket
Technical
Specifications).
Safety Cable
Rubber Feet (x4)
for floor mounting
Page 9 of 25
Advertisement
Table of Contents
