Table of Contents
Advertisement
Selecting the
Tilting Action
Locking and
Unlocking the
Touch Control
Panel
Selecting the
Dimmer Mode
Calibrating the
Moving Strip
COLORband™ PiX-M User Manual (Rev. 1)
To select the tilting action, follow the instructions below:
1.
Press <MENU> repeatedly until t-- shows on the display.
2.
Press <ENTER> and t 0–t100 shows on the display.
3.
Use <UP> or <DOWN> to select:
·
t 0–t 50 to set the desired tilt position (0–270°)
·
t 51–t100 for automatic motorized tilt speed (slow to fast)
4.
Press <ENTER>.
To lock/unlock the touch control panel, do the following:
1.
Press <MENU> repeatedly until Encd shows on the display.
2.
Press <ENTER> and OFF (unlocked) or ON (locked) shows on the display.
3.
Use <UP> or <DOWN> to select the desired option.
4.
Press <ENTER>.
To select the dimmer mode, follow the instructions below:
1.
Press <MENU> repeatedly until dIM shows on the display.
2.
Press <ENTER> and one of the following shows on the display:
·
OFF (dimmer speed off)
·
dIM1 (dimmer, fast speed)
·
dIM2 (dimmer, middle speed)
·
dIM3 (dimmer, slow speed)
3.
Use <UP> or <DOWN> to select the desired dimmer mode.
4.
Press <ENTER>.
To enable the calibration mode, do the following:
1.
Press <MENU> repeatedly until OFFS shows on the display.
2.
Press <ENTER> and 0–255 shows on the display.
3.
Use <UP> or <DOWN> to reposition the moving strip to the desired position.
4.
Press <ENTER>.
Page 21 of 25
Advertisement
Table of Contents
