Table of Contents
Advertisement
Configuration
(DMX)
Starting Address
CORE™ 3x3 Sections for DMX Control
Section 1
Section 4
Section 7
Page 12 of 23
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Turn the product on.
3.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The CORE™ 3x3 uses up to 31 DMX channels in its 31-channel DMX mode, which
defines the highest configurable address to 482.
If unfamiliar with DMX or DIP switches, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 3-CH, 5-CH, 9-CH, 27CH, or 31CH shows on the
display.
2.
Press <ENTER> to activate the selected DMX personality and d 1–d512 shows on
the display.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Section 2
Section 5
Section 8
Section 3
Section 6
Section 9
CORE™ 3x3 User Manual Rev. 1
Advertisement
Table of Contents
