Table of Contents
Advertisement
4. O
PERATION
Control Panel
Operation
Menu Map
Configuration
(DMX)
Starting Address
LFS-75DMX User Manual Rev. 3
To access the control panel functions, use the four buttons located underneath the
display.
Button
<MODE/ESC> Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Main Level
Programming Levels
DMX Address
d001–d512
CoLr
CoSP
Manual Mode
MAN
dimm
SHUt
Display
Temperature
Reset
Load
Set the product in DMX mode to control with a DMX controller.
1.
Move the position of the voltage selection switch to the appropriate input voltage.
2.
Connect the product to a suitable power outlet.
3.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The LFS-75DMX uses up to 4 DMX channels in its 4-channel DMX mode, which defines
the highest configurable address to 509.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MODE/ESC> repeatedly until d001–d512 shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Function
Selects the DMX starting address
Co00–Co17
Color wheel
Color scroll speed
CP00–CP63
(when CoLr is set to Co16 or Co17)
L000–L255
Dimmer (0–100%)
S000–S100
Shutter speed (slow to fast)
diS
Normal display
rdiS
Inverted display
tC__
Displays LED temperature in Celsius
rESt
Resets product
LoAd
Loads factory defaults
Description
Page 11 of 18
Advertisement
Table of Contents
