Whites Setting; White Calibration; Strobe Personality - Chauvet COLORado User Manual

Operation

Whites Setting

White Calibration

Strobe Personality

-14-
This setting allows you to select and edit the temperature of the white colors used in
channel 5 (Macros) when in the TOUR mode or channel 9 in TR16. mode.
1. Go to the CAL main level.
2. Enter the master access password as described in
3. Go to CAL1.
4. Select a white color (wT.01~11).
5. Select a color: R. (red), G. (green), b. (blue).
6. Select a color value (000~255).
7. Repeat for the other colors.
This setting allows you to select the white color shown by the COLORado™ 1-TRI
TOUR when the color setting is RGBw. and the DMX controller's red, green, and blue
faders are set to 255.
1. Go to the CAL main level.
2. Enter the master access password as described in
3. Go to CAL2.
4. Go to RGBw..
5. Select a color: R. (red), G. (green), b. (blue).
6. Select a color value (000~255).
7. Repeat for the other colors.
When selecting CAL > CAL2 > RGBw., you will only be able to define the values of
R. (red), G. (green), and b. (blue).
The values of R. (red), G. (green), and b. (blue) configured from CAL > CAL2 >
RGBw. will define the color temperature shown when the RGB faders are set to
"255" if SET > COLO. > RGBw. is active.
This setting allows you to select the classic strobe (01~20 Hz) or special
(random/slow/fast) strobe personalities.
1. Go to the SET main level.
2. Go to STRB..
3. Select a strobe personality (CLAS. or SPEC.).
Control Panel Lock
Control Panel Lock
COLORado™ 1-TRI TOUR User Manual