Dimmer Curves; Curve Settings; Control Panel Lock; Password - Chauvet COLORado User Manual

1-tri tour
Hide thumbs Also See for COLORado:
Table of Contents

Advertisement

Operation

Dimmer Curves

Curve Settings

Control Panel Lock

Password

Settings Lock Out

-12-
This setting determines how fast the output of the COLORado™ 1-TRI TOUR changes
when you modify the values of the red, green, blue, and dimmer faders. This setting
provides four different options to simulate the dimming speed of an incandescent lighting
product.
1. Go to the SET main level.
2. Select dIM..
3. Select a dimmer curve (OFF., dIM1., dIM2., dIM3., or dIM4.).
OFF.:
The output is proportional (linear) to the dimmer and RGB channel values.
dIM1.~dIM4.: The output follows the dimmer and RGB channel values based on the
corresponding dimmer speed, dIM1. being the fastest and dIM4. being the
slowest.
This setting determines the shape of the output curve of the COLORado™ 1-TRI TOUR
when you modify the values of the red, green, blue, and dimmer faders. This setting
provides three different options to simulate the dimming curve of an incandescent
lighting product.
1. Go to the SET main level.
2. Select CURV..
3. Select a dimmer curve (OFF., CV1., CV2., or CV3.).
OFF.:
This output is proportional (linear) to the dimmer and RGB channel values.
CV1.~CV3.: This output follows the dimmer and RGB channel values based on the
corresponding dimmer curve, CV1. being the fastest and CV3. being the
slowest.
This setting enables you to activate or disable the control panel lock, which keeps
unauthorized personnel from changing the product's settings.
1. Go to the KEY main level.
2. Select ON or OFF.
When the control panel lock is active, the product will prompt you to enter the
password after 30 seconds of control panel inactivity or after turning on the
product.
After being prompted to enter the password:
·
Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
This setting enables you to activate or disable the main level SET (settings) lock, which
keeps unauthorized personnel from changing the product's settings.
1. Go to the SET main level.
2. Select SLCK..
3. Select ON. or OFF..
COLORado™ 1-TRI TOUR User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorado 1-tri tour

Table of Contents