Setup; Ac Power; Ac Plug - Chauvet COLORado User Manual

Setup

3. Setup

AC Power

AC Plug

-6-
Each COLORado™ 1-TRI TOUR has an auto-ranging power supply that works with an
input voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements
for each COLORado™ 1-TRI TOUR, refer to the label affixed to the product. You can
also refer to the Technical Specifications
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the CHAUVET®
website: www.chauvetpro.com.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
The COLORado™ 1-TRI TOUR comes with a NEUTRIK® powerCON A connector on
one end and an Edison plug on the other end (US market). If the power cord adapter that
came with your product has no plug or you need to change the Edison plug, use the
table below to wire the new plug.
Connection
AC Live
AC Neutral
AC Ground
in this manual.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
Screw Color
Brown Yellow or Brass
Blue Silver
Green
COLORado™ 1-TRI TOUR User Manual